English- Home
- Stock Categories
- Technical Articles
- Yuken single Vane pump
- Yuken pressure valve
- DENISON vane pump
Home>Products>PAKER Piston Pump>PAKER PV180 R1K1T1NMMC Piston Pump
PAKER PV180 R1K1T1NMMC Piston Pump MODELS
Need a CAD or 3D Model?
PAKER PV180 R1K1T1NMMC Piston Pump
category
PAKER Piston Pump
PAKER PV180 R1K1T1NMMC Piston Pump SPECIFICATIONS
Welcome to ShanDong Single Pump Instrument Co., Ltd. the PAKER PV180 R1K1T1NMMC Piston Pump [Steel] Steel Bearing Material online seller.
- 3-1/4 in
- 299 kN
- 6 in
- 13.6 kN
- 7 in
- 2790 RPM
- 5.3543 in
- 38.9 mm
-
ShanDong Single Pump Instrument Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
PAKER PV180 R1K1T1NMMC Piston PumpCode description
- 2.7835 in
- 10 mm
- Split Roller Bearing Cartridge Assembly
- 01
- Non-Expansion Bearing (Fixed)
- 01B304GR
- -70 to +100 °C
- 01EBCP304GR
- 234 kN
- Steel
Details ofPAKER PV180 R1K1T1NMMC Piston Pump
PAKER PV180 R1K1T1NMMC Piston Pump Parts List | ||||||||
|---|---|---|---|---|---|---|---|---|
| Bearing Plate | 38,1 mm | 61,913 mm | 0,42 Kg | 125 kN | ||||
| Skeleton Oil Seal | 80 mm | 110 mm | 0,92 Kg | 64,4 kN | ||||
| Rotor | 65 mm | 140 mm | 77 mm | 3.2813 in | ||||
| Central Shaft | Contact Seal | 27600 | - | 0.0 | ||||
| Drive Shaft | 6 | 33,325 | - | 1.75 Inch | 44.45 Millimeter | ||||
| Housings Casings | 2.25 Inch | 57.15 Millimeter | 2.563 Inch | 65.09 Millimeter | 4.6 | 8000 r/min | ||||
| Oil Distribution Plate | 1.75 Inch | 44.45 Millimeter | 5 Inch | 127 Millimeter | 5.2 | 2.625 Inch | 66.675 Millimeter | ||||
| Bushing Spring | 3.2813 in | 30 | 60 | 0.013 to 0.018 | ||||
| Shoe Plates | 31171516 | Flanged | 38.1x61.913x33.325 | 0,626 Kg | ||||
| Friction Plate | 14000 r/min | 25,000 | Galvanized Steel | 2 Single Cone | 1 Double Cup | Non-Adjustable Bearing | With Keyway or Slot | ||||
| N309E | 45,000 mm | 100,000 mm | 80x110x30 | 25,000 mm | ||||
| 7207 C-UX | 35 mm | 72 mm | 61,913 mm | Galvanized Steel | ||||
| TMR140-200W | 5.625 Inch | 142.88 Millimeter | 100,000 | 0,626 Kg | 99 mm | ||||
How do you get air out of a hydraulic cylinder?
- 1、Apr 14, 2013 — Does anyone know how to bleed the air out of a hydraulic ... if you can get at the hydraulic line attached to the hydraulic cylinder, ...
- 2、For every pump stroke, the cylinder should rise evenly. If the cylinder movement is erratic or jerky, there may be air in the system. How to remove air from ...
- 3、May 28, 2011 — The pistons on almost all air cylinders have wear rings that help keep the piston from scouring the barrel when the rod is side loaded.
- 4、Any air in the hydraulic system will be trapped in the end of the cylinder (B) and may be bled off through the bleeder valve (C). It is advisable to bleed air ...
- 5、Jul 27, 2020 — It is also important that displacement hydraulic cylinders are bled before installation as any air trapped in the system would work like a gas ...
- 6、The purpose of the “Air Bleed” feature is to eliminate trapped air from within the hydraulic cylinder upon start up. Air bubbles in a hydraulic cylinder ...
- 7、Dec 17, 2021 — Just leave a little air in there to allow for the piston rod changing the volume. Make a funnel out of cardboard and tape it to the hose. Hold ...
- 8、Oct 10, 2016 — In the automotive industry, you will run into hydraulic cylinders on a ... to remove any air or other foreign debris from the cylinders.
- 9、Jan 20, 2021 — When you replace cylinders it takes several cycles to clear the air out. When it stops making progress reverse and top the tank off. make sure ...
- 10、Nov 24, 2020 — Release the air: If you're bleeding a cylinder, partially close it, but open the bleed valve on top. When the valve starts leaking hydraulic ...
How do you burp a hydraulic system?
- 1、Jun 12, 2019 — Bleeding the brakes is an inevitable part of DIY automotive repairs. Air can enter the brake system during repairs, but the more common ...
- 2、Nov 12, 2010 — Hi Vic, seems that I need some assistance, Please One of the bucket cylinders on my B1640 front loader was leaking so I have replaced the ...
- 3、Apr 15, 2012 — Avid mountain bike hydraulic disc brake speed bleed lever body master cylinder ... Avid has the cleanest bleeding system on the market.
- 4、How do you bleed air out of a hydraulic system? — What is the bleeder valve? How do I reduce the pressure in my hydraulic system? How do you bleed ...
- 5、Apr 8, 2021 — Before the installation: Before you install your double-acting hydraulic cylinder it is necessary to bleed the cylinder. This is because the air ...
- 6、Feb 7, 2022 — The manual method is the old-style variant of bleeding the cooling system. Some cars have one or more air bleed valves to get the air out from ...
- 7、Nov 14, 2021 — Bleeding Air from a Hydraulic System · Erosion caused by air bubbles in oil collapsing under pressure · Decrease and sometimes loss of lubricity ...
- 8、Apr 12, 2010 — The concept behind "holding the UP button while filling" allows the trim motor to suck up all of the fluid it can via the hydraulic system.
- 9、Nov 1, 2021 — How do you bleed air from a double acting hydraulic cylinder? ... Partially close the cylinder when all the air has raised to the top of the ...
- 10、Jan 2, 2015 — If a hydraulic system is not opened and is bled out properly to ... to bleed the brakes if air gets in the system, you can simply "burp" the ...
What is pump cavitation?
- 1、Nov 23, 2020 — Cavitation in pumps is the rapid creation and subsequent collapse of air bubbles in a fluid. When the Net Positive Suction Head Available ...
- 2、Aug 18, 2020 — Cavitation occurs when the liquid in a pump turns to a vapor, which then creates air bubbles at low pressure. Learn more here!
- 3、Cavitation occurs when the liquid in a pump turns to a vapor at low pressure. It occurs because there is not enough pressure at the suction end of the pump, or ...5 pages
- 4、Newtonian/Non-Newtonian fluids, water hammering, and cavitation in pumps. How these factors impact modern pumping systems.
- 5、The phenomena of pump cavitation is due to the vaporisation of the liquid pumped at the entrance of the pump impeller. Bubbles formed then collapse within ...
- 6、Sep 30, 2015 — Find out more about pump cavitation on the Prestige Pumps blog today. For more information, get in touch with our friendly customer service ...
- 7、Jun 13, 2020 — It most often occurs in centrifugal well pump types, such as jet pumps, but cavitation in submersible pumps is still possible and extremely ...
- 8、Cavitation occurs at the inlet of a pump impeller when small bubbles rapidly and repeatedly form and then almost immediately collapse sending a shock wave ...
- 9、Jun 17, 2020 — Cavitation occurs when air bubbles are generated inside a pump because of the partial pressure drop of the flowing liquid, resulting in a cavity ...
- 10、Cavitation can cause severe damage to water and wastewater pumps. This white paper explains how cavitation occurs and is intended to serve as a reference ...
How do you bleed a hydraulic hand pump?
- 1、Mar 8, 2009 — There is a screw inside that says bleeding . ... Get hydraulic fluid in the quart bottle that has the spout on the end like an old ketchup ...
- 2、The pressure is manually generated through the use of hand pump and hydraulic oil is used as the pressure medium. Test gauges which are filled with oil can ...
- 3、Dec 14, 2019 — This information can be found in the Workshop Manual, TSD4400 in ... to the front brake pump, which in turn supplies hydraulic system ...
- 4、Sep 9, 2014 — BLEEDING THE HYDRAULIC SYSTEM. Connect a cylinder to the pump. Position the cylinder below the level of the pump with its pressure ports.
- 5、Pump the hydraulic piston control a few times to help initiate the flow. For example, if you are trying to bleed brake lines on your car, you should pump the ...
- 6、Filling and bleeding LS hydraulic steering system with Speedy Purge ... Bleeding of a linear drive for internal installation with fixed flow.Lecomble & Schmitt · Lecomble & Schmitt Service Communication · Dec 13, 2018
- 7、Use a hand-operated vacuum pump to bleed a clutch — Tip: Refer to the vacuum pump manual to find out ... in the fluid or hydraulic system, ...
- 8、Jul 26, 2016 — Pump 10 times with valve open ... While in full extension, continue to pump 10 times ... How to Bleed Hydraulic Axle and Bottle Jacks ...
- 9、Nov 4, 2019 — Close the release valve on the front of the hydraulic hand pump by rotating it clockwise until fully tight. Open the bleed valve on the rear of ...
- 10、The 767 Hydraulic Hand Pump develops 6500 psi. (44,818 kPa) at 0.0823 in3 (1.3 cm3) per stroke ... Fill with Greenlee hydraulic oil or Mobil DTE-13 only.
What is foaming in hydraulic system?
- 1、May 14, 2018 — The fluid should have a minimum viscosity at the highest operating temperature. In addition, foaming of hydraulic fluid is a problem that arises ...
- 2、Jun 1, 2018 — Anti-Foaming property prevents the foam's access to the hydraulic system,; Proper viscosity makes it is viscous so that it can move smoothly in ...
- 3、Jan 28, 2020 — Quality hydraulic oils must contain high pressure, anti-rust, anti-wear, and anti-foaming agents—all are necessary for the oil to do its job.
- 4、Unstable foam is often caused by high levels of agitation in the fluid system and does not cause much of a problem in machining operations; ...
- 5、by TĆ Prolić · 2012 · Cited by 6 — The foaming tendency of lubricating oils represents a serious problem in systems ... A – Biodegradable synthetic-based hydraulic lubricant (HEES), ...
- 6、With the fluid level full and no foam in the reservoir, begin cycling the hydraulic system. A. MotoRIZeD - Fully extend leveling jacks.
- 7、Nov 14, 2021 — Foam might be generated when mixing liquids and gases. This is because liquids can absorb nearby gases and forming foam. If the hydraulic fluid ...
- 8、while degrading in the presence of crude oil. The generated dry foam system was then used as a hydraulic fracturing fluid in a tight shale formation. The strong ...
- 9、Jun 11, 2019 — for the hydraulic system. The definition of Turbine oil is: Turbine oil is commonly referred to as turbine oil, including gas turbine oil, steam ...
- 10、systems is Caterpillar Hydraulic Oil (HYDO). ... The hydraulic system of most ... Foam,***. Seq. I (ASTM D892). 25/0. 25/0. Seq. II (ASTM D892).
What causes aeration in a hydraulic system?
- 1、Damaged seals contribute to hydraulic fluid leaks, which cause your machinery to lose power. Aeration also affects the pistons in your hydraulic system.
- 2、by S Gullapalli — when localized pressures in a hydraulic system drop below the saturation pressure of air in oil, causing the formation of bubbles in the fluid. Cavitation ...
- 3、Nov 1, 2021 — Air contamination is the entrance of air into a hydraulic system and consists of two types — aeration and cavitation. Both can cause severe ...
- 4、May 13, 2021 — Cavitation is a condition which destroys the effectiveness and efficiency of hydraulic pumps. The attached picture shows classic cavitation ...
- 5、Apr 23, 2010 — Fluid aeration and cavitation can cause many problems in a hydraulic and lubrication oil system, including abnormal noise, poor component ...
- 6、As examples, not having enough fluid may cause parts to starve for oil (cavitation), or allow air to be sucked into your system (aeration).
- 7、Cavitation in Hydraulic Systems · bad suction line (too narrow, too long, too "elbowy" or too high above oil level) - bad design · clogged or undersized suction ...
- 8、Apr 9, 2019 — As pressures and temperatures fluctuate in a hydraulic system, the fluid will absorb gas or release dissolved gases to main this equilibrium ...
- 9、Jan 2, 2020 — Cavitation can also occur when air is trapped within the hydraulic fluid (a phenomenon known as aeration). As pressure increases (e.g., as the ...
- 10、There are several things that can disrupt a hydraulic system and lead to pump ... worn seals and blocked filters are all common causes for cavitation.
How do you release air from a hydraulic system?
- 1、Aug 26, 2008 — Operate system and adjust nut on top of lubricator until an occasional drop of oil is passed into the air line. Use Mobil 24 or 25 hydraulic oil ...
- 2、Partially close the cylinder when all the air has raised to the top of the cylinder. Open the bleed valve at the top for the air to escape.Nov 1, 2021 · Uploaded by Geoprobe Systems
- 3、Sep 2, 2021 — What does a hydraulic system do? Instead of air, machines that use hydraulics rely on mostly incompressible liquid material under pressure ...
- 4、Remove the breather cap with dip stick, so you may view the hydraulic fluid ... steps more than once to completely purge all of the air out of the system.
- 5、If the pump does not pull a prime, temporarily loosen a fitting in the pressure line to remove any trapped air. 11. Check gauge pressure to be sure it is as ...
- 6、Oct 14, 2021 — Air bleed valves can be used anywhere in a hydraulic system when it is necessary to remove trapped air. However, they are most often used to ...
- 7、Cavitation occurs when air is released from the hydraulic oil during momentary depressurization at the pump suction and then imploded onto metal surfaces upon ...
- 8、Learn how to remove the air from a hydraulic power steering system on a vehicle after replacing a steering pump or flushing the steering system.
- 9、What are the reasons causing pressure drop in hydraulic systems? arrow_forward · Describe the functions of the hydraulic systemcombination valve. arrow_forward.
- 10、If the system proves to be particularly difficult to bleed, install a bleeder valve in the system. WARNING. Never touch an escaping high-pressure hydraulic oil ...
What will happen if there is air trapped in the hydraulic system?
- 1、May 24, 2019 — This allows air released from the system's initial charge of water to move ... trapped on the water side of the expansion tank when the system is first filled. ... If the tank needs to be near a hydraulic separator it is best to mount it
- 2、Hydraulic pumps are not designed to pump air, essentially because when ... fluid, usually via the pump's inlet, aeration, cavitation, or foaming can occur. ... Abnormal noise is often a tell-tale sign that there is trapped air in a hydraulic system
- 3、Mar 29, 2019 — Air in your hydraulic lines can eventually cause damage to the entire system, so it's a good idea to bleed the lines once in a while, or if you
- 4、Air has no place in a hydraulic power steering system. ... If topping off the fluid calms down the noise and returns power steering operation to normal, then all is well. ... it's always a good plan to flush and bleed the power steering system of air
- 5、Mar 31, 2015 — Hydraulic steering systems should be checked for leaks throughout the ... as these are areas where chafe and corrosion often occur. If ... However, if any air gets into the system it will cause the steering to feel spongy or even fail altogether. ... back when released, that's a pretty good indication of trapped air.”
- 6、An air lock is a restriction of, or complete stoppage of liquid flow caused by vapour trapped in a high point of a liquid-filled pipe system. The gas, being less dense than the liquid, rises to any high points. ... Air lock problems often occur when one is trying to recommission a system after it has been deliberately (for servicing) or
- 7、Feb 16, 2016 — There are five problems associated with aerated oil that can be deadly to ... way through the lubrication system, similar to how bubbles are formed when you ... Within a hydraulic system, air can be trapped or otherwise exist in
- 8、Jul 13, 2018 — “Everyone needs to be aware of hydraulic system safety,” says Gary Kleiner, ... “Mistakes can happen when someone forgets to secure a load or when they ... “If there is air trapped in a cylinder, the air will act like a sponge
- 9、Jan 13, 2010 — How do I purge the hydraulic system? Hydrostatic transmissions ... If any air is in the fluid, the pump will try to pressurize air. This condition is
- 10、Apr 30, 2014 — For instance, when running across a lake where you have to run ... the hydraulic fluid will ooze out and allow air to replace it in the system. When that happens, the motor will usually tilt all the way down and will not go up or will stick. ... it's non-foaming so you don't get any air trapped in it, and it's made to
How do you know if you have air in your hydraulic system?
- 1、Oct 12, 2020 — Check your hydraulic levels by using either the sight glass or dipstick. If you need to add fluid, be sure to cycle the hoist several times.
- 2、Nov 17, 2017 — Abnormal noise in hydraulic systems is often caused by aeration or cavitation. Aeration occurs when air contaminates the hydraulic fluid. Air in ...
- 3、If your oil appears foamy or milky, you may have a leak that is causing air to enter the system. Air will cause jerky and slow operation of the hydraulics.
- 4、... try restarting your device. Your browser can't play this video. ... Hydraulic System - Bleed Air. 295,478 views295K views. Feb 2, 2016.YouTube · Total Secure · Feb 2, 2016
- 5、Several incorrect operating situations may cause your hydraulic system to bang loudly. One such example is if a component (pump, motor or cylinder) begins to ...
- 6、Because the injury can feel minor, like a bee sting or jabbing yourself with a pin, it often goes unnoticed and ignored. If you're checking for fluid leaks, ...
- 7、Nov 24, 2020 — Release the air: If you're bleeding a cylinder, partially close it, but open the bleed valve on top. When the valve starts leaking hydraulic ...
- 8、Jun 30, 2021 — Air bubbles in the system undergo extreme compression and decompression. Cavitation is a related phenomenon that happens when there's not enough ...
- 9、Sep 15, 2020 — In open-circuit hydraulic systems, air moves freely into and out of the reservoir as the fluid level falls and rises. Unfiltered air can ...
- 10、Aug 15, 2019 — If there is air in the system, you do not get enough pressure and the clutch is not able to fully engage. Bleeding the clutch is a process in ...
What causes a hydraulic pump to lose pressure?
- 1、The lower the viscosity of hydraulic oil, the higher the pressure, and the greater the leakage. 2. In the process of oil absorption, because the oil absorption ...
- 2、Over Recommended Pressure; Loose Cylinder Head/Valve Cover ... Excessive discharge pressure; Improper torquing of nuts; Shock overload caused by pump ...
- 3、Oct 9, 2013 — It is more likely that the seal on the end of the hydraulic cylinder has ... This would also cause the pump to run as it is losing pressure.
- 4、Feb 26, 2020 — This often causes chattering, where the valve isn't fully open, but is opening and closing rapidly, preventing it from properly doing its job.
- 5、Check to see that the orifices do not exceed the capacity of the pump. ... CONDITION & POSSIBLE CAUSES. CORRECTIVE ACTION ... Low Hydraulic Pressure Setting.
- 6、Aug 5, 2014 — Shutting a discharge valve off on a pump causes the fluid ... The pump loses inlet head or pressure from friction loss of the fluid moving ...
- 7、Jun 4, 2021 — If your pump is receiving fluid, then the cause of the lack of pressure may be a problem with the machine drive motor. Damaged or misaligned ...
- 8、Source/Symptom: Low pressure ; Relief valve or unloading valve set too low, Adjust. ; Variable displacement mechanism malfunctioning. Check pump compensator.
- 9、Mar 24, 2021 — The most common causes of poor hydraulic performance are ... higher than the pump pressure compensator to prevent excessive operation of the ...
- 10、May 18, 2020 — Measures shall be taken for hydraulic press to reduce system temperature. 2. Replace or repair used hydraulic pump.
| PAKER F12-030-MF-IV-K-000-000-0 Piston Pump | Maximum Axial Force At Standstill:3-1/4 in; Control Fluid Drain:299 kN; Moment of inertia rotary group:6 in; Torque:13.6 kN; Maximum Torque:7 in; Rotary stiffness:2790 RPM; Displacement, geometric, per revolution:5.3543 in; Nominal Resistance:38.9 mm; Voltage:2.7835 in; Control Pressure Measurement:10 mm; Determining Operating Characteristics:Split Roller Bearing Cartridge Assembly; Flow:01; Maximum Volume Flow:Non-Expansion Bearing (Fixed); Case volume:01B304GR; Maximum rotational speed:-70 to +100 °C; Maximum Permissible Speed (limit Speed):01EBCP304GR; Drive Speed:234 kN; Rate Of Pressure Change:Steel; |
| PAKER F12-090-MS-SV-T-000 Piston Pump | Pressurefree Operation:3-1/4 in; Rate Of Pressure Change:299 kN; Moment of inertia rotary group:6 in; Maximum Volume Flow:13.6 kN; Maximum Permissible Speed (limit Speed):7 in; Displacement, geometric, per revolution:2790 RPM; Sequence Valve:5.3543 in; Drive Speed:38.9 mm; Maximum Permissible Pilot Pressure:2.7835 in; Nominal Resistance:10 mm; Case volume:Split Roller Bearing Cartridge Assembly; Maximum Torque:01; Power:Non-Expansion Bearing (Fixed); Flow:01B304GR; Control Pressure Measurement:-70 to +100 °C; Drive Power:01EBCP304GR; Torque:234 kN; Rotary stiffness:Steel; |
| PAKER F11-010-MV-SV-K-000-000-0 Piston Pump | Determining Operating Characteristics:3-1/4 in; Pilot Pressure:299 kN; Pressurefree Operation:6 in; Maximum angular acceleration:13.6 kN; Rate Of Pressure Change:7 in; Power:2790 RPM; Flow:5.3543 in; Sequence Valve:38.9 mm; Displacement, geometric, per revolution:2.7835 in; Maximum Permissible Speed (limit Speed):10 mm; Torque:Split Roller Bearing Cartridge Assembly; Moment of inertia rotary group:01; Case volume:Non-Expansion Bearing (Fixed); Maximum Permissible Pilot Pressure:01B304GR; Maximum Torque:-70 to +100 °C; Voltage:01EBCP304GR; Nominal Resistance:234 kN; Maximum Volume Flow:Steel; |
| PAKER F12-080-MS-SN-T-000-000-0 Piston Pump | Maximum rotational speed:3-1/4 in; Drive Power:299 kN; Moment of inertia rotary group:6 in; Pressurefree Operation:13.6 kN; Rotary stiffness:7 in; Maximum angular acceleration:2790 RPM; Pilot Pressure:5.3543 in; Case volume:38.9 mm; Torque:2.7835 in; Displacement, geometric, per revolution:10 mm; Maximum Permissible Speed (limit Speed):Split Roller Bearing Cartridge Assembly; Flow:01; Rate Of Pressure Change:Non-Expansion Bearing (Fixed); Load Pressure:01B304GR; Power:-70 to +100 °C; Determining Operating Characteristics:01EBCP304GR; Drive Speed:234 kN; Nominal Resistance:Steel; |
| PAKER F12-060-MF-IV-D-000-000-0 Piston Pump | Drive Speed:3-1/4 in; Maximum angular acceleration:299 kN; Drive Power:6 in; Maximum rotational speed:13.6 kN; Maximum Axial Force At Standstill:7 in; Case volume:2790 RPM; Nominal Resistance:5.3543 in; Moment of inertia rotary group:38.9 mm; Rate Of Pressure Change:2.7835 in; Torque:10 mm; Control Pressure Measurement:Split Roller Bearing Cartridge Assembly; Power:01; Maximum Torque:Non-Expansion Bearing (Fixed); Pressurefree Operation:01B304GR; Flow:-70 to +100 °C; Maximum Permissible Speed (limit Speed):01EBCP304GR; Rotary stiffness:234 kN; Weight (approx.):Steel; |
| PAKER F11-005-MB-SV-K-000-000-0 Piston Pump | Displacement, geometric, per revolution:3-1/4 in; Drive Power:299 kN; Weight (approx.):6 in; Case volume:13.6 kN; Pressurefree Operation:7 in; Power:2790 RPM; Rate Of Pressure Change:5.3543 in; Pilot Pressure:38.9 mm; Flow:2.7835 in; Maximum Permissible Pilot Pressure:10 mm; Maximum angular acceleration:Split Roller Bearing Cartridge Assembly; Control Pressure Measurement:01; Determining Operating Characteristics:Non-Expansion Bearing (Fixed); Maximum rotational speed:01B304GR; Drive Speed:-70 to +100 °C; Maximum Volume Flow:01EBCP304GR; Maximum Permissible Speed (limit Speed):234 kN; Load Pressure:Steel; |
| PAKER F11-019-MV-SV-K-000-000-0 Piston Pump | Maximum Axial Force At Standstill:3-1/4 in; Moment of inertia rotary group:299 kN; Maximum Permissible Speed (limit Speed):6 in; Rate Of Pressure Change:13.6 kN; Load Pressure:7 in; Displacement, geometric, per revolution:2790 RPM; Weight (approx.):5.3543 in; Nominal Resistance:38.9 mm; Case volume:2.7835 in; Maximum rotational speed:10 mm; Flow:Split Roller Bearing Cartridge Assembly; Drive Power:01; Maximum angular acceleration:Non-Expansion Bearing (Fixed); Maximum Permissible Pilot Pressure:01B304GR; Voltage:-70 to +100 °C; Maximum Torque:01EBCP304GR; Pressurefree Operation:234 kN; Control Pressure Measurement:Steel; |
| PAKER F12-110-MS-SV-S-000 Piston Pump | Maximum Torque:3-1/4 in; Pilot Pressure:299 kN; Power:6 in; Drive Speed:13.6 kN; Determining Operating Characteristics:7 in; Control Fluid Drain:2790 RPM; Torque:5.3543 in; Maximum Volume Flow:38.9 mm; Weight (approx.):2.7835 in; Sequence Valve:10 mm; Drive Power:Split Roller Bearing Cartridge Assembly; Flow:01; Voltage:Non-Expansion Bearing (Fixed); Maximum Axial Force At Standstill:01B304GR; Maximum rotational speed:-70 to +100 °C; Case volume:01EBCP304GR; Control Pressure Measurement:234 kN; Nominal Resistance:Steel; |
| PAKER F12-040-MF-IV-K-000-000-0 Piston Pump | Pilot Pressure:3-1/4 in; Nominal Resistance:299 kN; Rate Of Pressure Change:6 in; Load Pressure:13.6 kN; Case volume:7 in; Determining Operating Characteristics:2790 RPM; Maximum Permissible Pilot Pressure:5.3543 in; Power:38.9 mm; Torque:2.7835 in; Displacement, geometric, per revolution:10 mm; Maximum Volume Flow:Split Roller Bearing Cartridge Assembly; Weight (approx.):01; Rotary stiffness:Non-Expansion Bearing (Fixed); Flow:01B304GR; Sequence Valve:-70 to +100 °C; Maximum Permissible Speed (limit Speed):01EBCP304GR; Drive Speed:234 kN; Moment of inertia rotary group:Steel; |
| PAKER CB-B125 Piston Pump | Maximum Permissible Speed (limit Speed):3-1/4 in; Control Fluid Drain:299 kN; Sequence Valve:6 in; Maximum angular acceleration:13.6 kN; Maximum Torque:7 in; Weight (approx.):2790 RPM; Drive Power:5.3543 in; Moment of inertia rotary group:38.9 mm; Flow:2.7835 in; Maximum Axial Force At Standstill:10 mm; Pressurefree Operation:Split Roller Bearing Cartridge Assembly; Case volume:01; Rate Of Pressure Change:Non-Expansion Bearing (Fixed); Torque:01B304GR; Nominal Resistance:-70 to +100 °C; Rotary stiffness:01EBCP304GR; Voltage:234 kN; Load Pressure:Steel; |
PAKER PV180 R1K1T1NMMC Piston Pump Video
Contact Us
- ShanDong Single Pump Instrument Co., Ltd.
- AddressChangQing District, Jinan City, Shandong Province, China
PAKER PV180 R1K1T1NMMC Piston Pump Technical Articles
| How do hydraulic motors work? |
| How do you size a hydraulic pump? |
| What are the most common causes of hydraulic system failure? |
PAKER Piston Pump CATEGORIES
- Yuken single Vane pump
- Yuken pressure valve
- DENISON vane pump
- Yuken Piston pump
- Rexroth PRESSURE RELIEF VALVE
- Danfoss Shut-off valves
- Rexroth THROTTLE VALVE
- PAKER Piston Pump
- Yuken Double Vane pump
- Rexroth Piston Pump
- Rexroth Solenoid directional valve
- Rexroth check valve
- Rexroth Vane pump
- BOSCH injector
- CUMMINS injector
- DELPHI injector
- DEUTZ injector
- COMMON RAIL injector
PAKER F12-110-MS-SV-S-000 Piston Pump
PAKER F12-090-MS-SV-T-000 Piston Pump
PAKER F12-080-MS-SN-T-000-000-0 Piston Pump
PAKER F12-060-MF-IV-D-000-000-0 Piston Pump
PAKER F12-040-MF-IV-K-000-000-0 Piston Pump