Rexroth WE10......3X/HG24N9K4 Solenoid directional valve

Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:168000 N; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:3800 rpm; B:36.00 mm; d:105.000 mm; Basic Static Radial Load Rating Co:153000 N; D:190.0000 mm;

Dynamic (Cr):16.388 kN; Oil:15 000 min-1; rs (min):1 mm; d:20 mm; a:15 mm; r1s (min):0.6 mm; D:47 mm; Grease:12 600 min-1; Static (Cor):8.535 kN; B:14 mm;

Hydraulic nut:HMV 32 E; Mass adapter sleeve assembly:9.4 kg; B:25 mm; Lock nut:KM 32; G:M 160x3; B1:147 mm; d1:138.113 mm; d3:210 mm; d:160 mm; Locking device:MB 32;

Appropriate attachment bolt size G:0.625 in; h:31.75 mm; Housing:FSAFS 516; S:4.763 mm; ba:34.131 mm; P60°:138 kN; Adapter sleeve assembly:SNW 16x2.5/8; Cap bolt, SAE grade:8; P180°:52.5 kN; Cap bolt:2 x 5/8-11 UNC;

D:190.0000 mm; Basic Dynamic Radial Load Rating C:142000 N; d:105.000 mm; B:36.00 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:2600 rpm; Basic Static Radial Load Rating Co:153000 N; Oil Speed Rating Open/Shielded n2:3200 rpm; Accessories:One Shield & Snap-Ri;

Housing:FY 506 M/VZ033; End cover:ECY 206; B:38.1 mm; Mass bearing unit:1 kg; Limiting speed:1200 r/min; Da:93.7 mm; J7:24.5 mm; Hexagonal key size for grub screw N:3.175 mm; A:32.5 mm; T:42.2 mm;

Db max.:57.8 mm; da min.:39.6 mm; Static axial stiffness, preload class B:119 N/µm; B:14 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Static axial stiffness, preload class C:154 N/µm; d:35 mm; r3,4 min.:0.6 mm; Calculation factor f2C:1.06; Calculation factor e:0.68;

J max.:279.4 mm; h:49.212 mm; Cap bolt:2 x 5/8-11 UNC; H2:31.75 mm; Stabilizing ring:2 x SR-1516; ba:30.163 mm; A1:88.9 mm; Da:140 mm; Pa:6.23 kN; Cap bolt recommended tightening torque:149.1 N·m;

Pu:3050 kN; Static (Cor):16.7 mm; with tapered bore:850 min-1; d:300 mm; Grease:5160 kN; D:500 mm; Dynamic (Cr):9 mm; Oil:415.160 kN; B:160 mm; with cylindrical bore:670 min-1;

Basic static load rating C0:20.4 kN; Limiting speed:15000 r/min; Radial shaft seal with a low cross-sectional height, single lip:G 16x22x3; Mass bearing:0.013 kg; Fatigue load limit Pu:2.32 kN; Fw:16 mm; Reference speed:12000 r/min; Radial shaft seal with a low cross-sectional height, double lip:SD

B:21.00 mm; Basic Dynamic Radial Load Rating C:35800 N; Fillet Radius ra:1.50 mm; D:80.0000 mm; Oil Speed Rating n2:11000 rpm; Basic Static Radial Load Rating Co:24000 N; Grease Speed Rating n1:8500 rpm; d:35.000 mm;

D:52.0000 mm; Basic Dynamic Radial Load Rating C:23800 N; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:20000 N; B:22.20 mm; Sealed Speed Rating n3:8500 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:8500 rpm; Oil Speed Rating n2:12000 rpm; d:20.000 mm;

Tolerance housing:H7; B:20 mm; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; d:22 mm; D:32 mm; Tolerance shaft:h8; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²;

Pa:15 kN; B:71 mm; Bearing mean diameter dm:85 mm; H:151 mm; P150°:130 kN; Fatigue load limit Pu:18.6 kN; Calculation factor e:0.24; A5:35.5 mm; P0°:270 kN; N4 max.:8 mm;

r1 min.:1 mm; l7 min.:85 mm; Mass rod end:7.9 kg; d2 max.:162 mm; C1 max.:43 mm; h:235 mm; Basic dynamic load rating C:465 kN; dk:92 mm; d:70 mm; G:M 56x4;